SPC Nickel Intersects 1.46% Nickel and 0.32% Copper over 10.5 metres at the West Graham Project, Sudbury, Ontario
From June to
Highlights:
- Hole WG-24-109, intersected 1.46% Ni and 0.32% Cu over 10.5 metres from 85.5 to 96.0 metres. This interval is part of a wider interval that returned 0.78% Ni and 0.38% Cu over 45.6 metres from 72.9 to 118.5 metres (Figure 1).
- Hole WG-24-108, intersected 1.04% Ni and 0.50% Cu over 10.0 metres from 68.0 to 78.0 metres.
Assay Results
Table 1: New assay results from the 2024 drill program on the
HOLE ID |
From |
To |
Length |
Ni |
Cu |
Co |
Pt |
Pd |
Au |
Ag |
Estimated True Width % |
WG-24-105 |
21.00 |
42.00 |
21.00 |
0.47 |
0.28 |
0.02 |
0.03 |
0.01 |
0.02 |
1.52 |
95 |
WG-24-106 |
39.00 |
61.20 |
22.20 |
0.54 |
0.27 |
0.02 |
0.03 |
0.02 |
0.02 |
1.64 |
70 |
including |
54.00 |
61.20 |
7.20 |
0.77 |
0.40 |
0.03 |
0.04 |
0.02 |
0.02 |
2.16 |
70 |
WG-24-107 |
55.50 |
102.00 |
46.50 |
0.59 |
0.32 |
0.02 |
0.03 |
0.02 |
0.02 |
1.81 |
95 |
including |
69.00 |
75.00 |
6.00 |
1.11 |
0.31 |
0.04 |
0.03 |
0.02 |
0.02 |
1.23 |
95 |
WG-24-108 |
25.50 |
40.50 |
15.00 |
0.47 |
0.17 |
0.02 |
0.02 |
0.01 |
0.01 |
0.88 |
85 |
including |
68.00 |
78.00 |
10.00 |
1.04 |
0.50 |
0.03 |
0.07 |
0.02 |
0.02 |
2.57 |
85 |
including |
70.50 |
73.50 |
2.00 |
1.61 |
0.34 |
0.05 |
0.06 |
0.01 |
0.01 |
1.65 |
85 |
WG-24-109 |
72.90 |
118.50 |
45.60 |
0.78 |
0.38 |
0.03 |
0.08 |
0.02 |
0.03 |
2.00 |
100 |
including |
79.50 |
97.50 |
18.00 |
1.17 |
0.37 |
0.04 |
0.07 |
0.03 |
0.03 |
1.57 |
100 |
Including |
85.50 |
96.00 |
10.50 |
1.46 |
0.32 |
0.05 |
0.09 |
0.03 |
0.04 |
1.40 |
100 |
and |
106.50 |
110.82 |
4.32 |
1.16 |
0.52 |
0.04 |
0.23 |
0.03 |
0.05 |
3.01 |
100 |
Notes: 1. Length refers to downhole length. Estimated True Width is expressed as a percentage of downhole length. |
About the West Graham Deposit
In
Table 2: Previously released results from the 2024 drill program on the
HOLE ID |
From |
To |
Length |
Ni |
Cu |
Co |
Pt |
Pd |
Au |
Ag |
Estimated True Width % |
WG-24-086 |
10.00 |
40.00 |
30.00 |
0.46 |
0.25 |
0.01 |
0.05 |
0.02 |
0.01 |
1.84 |
100 |
WG-24-087 |
10.00 |
51.00 |
41.00 |
0.63 |
0.24 |
0.02 |
0.04 |
0.02 |
0.02 |
1.41 |
95 |
including |
32.00 |
48.00 |
16.00 |
1.05 |
0.30 |
0.03 |
0.06 |
0.02 |
0.03 |
1.82 |
95 |
WG-24-088 |
9.05 |
47.00 |
37.95 |
0.87 |
0.32 |
0.03 |
0.05 |
0.02 |
0.02 |
1.95 |
100 |
including |
13.00 |
42.00 |
29.00 |
1.03 |
0.34 |
0.04 |
0.05 |
0.03 |
0.02 |
1.98 |
100 |
including |
20.00 |
36.00 |
16.00 |
1.41 |
0.33 |
0.05 |
0.03 |
0.01 |
0.06 |
1.75 |
100 |
WG-24-089 |
3.50 |
21.00 |
17.50 |
0.55 |
0.40 |
0.02 |
0.07 |
0.02 |
0.02 |
2.34 |
100 |
WG-24-090 |
2.80 |
18.00 |
15.20 |
0.52 |
0.33 |
0.02 |
0.04 |
0.04 |
0.02 |
1.84 |
90 |
WG-24-091 |
2.80 |
19.00 |
16.20 |
0.65 |
0.38 |
0.02 |
0.06 |
0.02 |
0.03 |
2.22 |
75 |
including |
2.80 |
12.00 |
9.20 |
0.81 |
0.36 |
0.03 |
0.07 |
0.02 |
0.02 |
2.24 |
75 |
WG-24-092 |
1.15 |
36.00 |
34.85 |
0.75 |
0.24 |
0.03 |
0.04 |
0.02 |
0.01 |
1.21 |
90 |
including |
15.00 |
27.00 |
12.00 |
1.15 |
0.29 |
0.04 |
0.06 |
0.03 |
0.01 |
1.38 |
90 |
WG-24-093 |
14.00 |
33.00 |
19.00 |
0.76 |
0.24 |
0.03 |
0.04 |
0.02 |
0.02 |
1.98 |
100 |
WG-24-094 |
2.00 |
28.00 |
26.00 |
0.54 |
0.28 |
0.02 |
0.03 |
0.02 |
0.01 |
1.62 |
100 |
including |
14.00 |
23.00 |
9.00 |
0.81 |
0.36 |
0.03 |
0.03 |
0.02 |
0.02 |
1.97 |
100 |
WG-24-095 |
17.00 |
23.00 |
6.00 |
0.51 |
0.29 |
0.02 |
0.05 |
0.02 |
0.03 |
1.58 |
100 |
WG-24-096 |
3.00 |
19.00 |
16.00 |
0.73 |
0.26 |
0.03 |
0.04 |
0.02 |
0.02 |
1.34 |
100 |
WG-24-097 |
4.00 |
26.00 |
22.00 |
0.46 |
0.32 |
0.02 |
0.07 |
0.02 |
0.03 |
2.01 |
100 |
WG-24-098 |
1.00 |
33.00 |
32.00 |
0.51 |
0.31 |
0.02 |
0.06 |
0.02 |
0.02 |
1.53 |
100 |
including |
20.00 |
29.00 |
9.00 |
0.72 |
0.37 |
0.02 |
0.08 |
0.02 |
0.02 |
1.78 |
100 |
WG-24-099 |
7.00 |
48.00 |
41.00 |
0.46 |
0.21 |
0.02 |
0.04 |
0.02 |
0.01 |
1.00 |
95 |
including |
37.00 |
43.00 |
6.00 |
0.88 |
0.21 |
0.03 |
0.06 |
0.02 |
0.01 |
1.15 |
95 |
WG-24-100 |
11.30 |
46.00 |
34.70 |
0.35 |
0.19 |
0.01 |
0.03 |
0.01 |
0.02 |
1.24 |
95 |
including |
37.00 |
43.00 |
6.00 |
0.64 |
0.31 |
0.02 |
0.07 |
0.02 |
0.03 |
1.95 |
95 |
WG-24-101 |
14.00 |
58.00 |
44.00 |
0.53 |
0.18 |
0.02 |
0.04 |
0.01 |
0.01 |
1.28 |
95 |
including |
35.00 |
49.70 |
14.70 |
0.83 |
0.19 |
0.03 |
0.05 |
0.02 |
0.01 |
1.52 |
95 |
WG-24-102 |
13.50 |
43.50 |
30.00 |
0.65 |
0.29 |
0.02 |
0.03 |
0.02 |
0.02 |
1.79 |
75 |
including |
16.50 |
19.50 |
3.00 |
1.59 |
0.15 |
0.06 |
0.04 |
0.02 |
0.004 |
1.10 |
75 |
WG-24-103 |
15.00 |
36.00 |
21.00 |
0.24 |
0.16 |
0.01 |
0.02 |
0.01 |
0.01 |
1.06 |
95 |
WG-24-104 |
33.00 |
49.50 |
16.50 |
0.33 |
0.18 |
0.01 |
0.02 |
0.01 |
0.01 |
1.01 |
100 |
Notes: 1. Length refers to downhole length. Estimated True Width is expressed as a percentage of downhole length. |
Quality Assurance, Quality Control and Qualified Persons
The technical elements of this news release have been approved by Mr.
About
Cautionary Note on Forward-Looking Information
Except for statements of historical fact contained herein, the information in this news release constitutes "forward-looking information" within the meaning of Canadian securities law. Such forward-looking information may be identified by words such as "plans", "proposes", "estimates", "intends", "expects", "believes", "may", "will" and include without limitation, statements regarding estimated capital and operating costs, expected production timeline, benefits of updated development plans, foreign exchange assumptions and regulatory approvals. There can be no assurance that such statements will prove to be accurate; actual results and future events could differ materially from such statements. Factors that could cause actual results to differ materially include, among others, metal prices, competition, risks inherent in the mining industry, and regulatory risks. Most of these factors are outside the control of
Neither
SOURCE